User's Manual Part 2

33
24
Modify PIN
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
1. Perform steps 1 and 2 of paragraph "
".
2. Use the key to choose menu,
press the soft key.
3. The display shows " ". Enter the current
PIN, then press the key. If the old PIN
code is validated, you will be prompted to
enter a new PIN code. If the old PIN is not
validated, a warning beep will sound and you
will be returned to the menu.
4. Enter the new PIN, press the key. You
will be requested to confirm the PIN code.
Enter the new PIN again then press the
soft key to confirm and exit.
Modify PIN
Select
PIN?
Next
Modify PIN
Next
Save
Terminate
HS
BS Reset
This function allows you to reset the Base
setting to the factory default.
2. Press the key to choose menu,
press the soft key. You will be
prompted to enter the PIN code.
3. Enter the PIN code (the default PIN is 0000),
then press the soft key. If the PIN
code is validated all base settings will be
reset to the factory default, otherwise the
settings will remain.
After resetting, the base will be reset
and the handset will return to Standby
mode.
BS Reset
Select
Reset
Result:
1. Perform steps 1 and 2 of paragraph "
".
Terminate
HS
n Paging
n Dial Mode
To stop paging, press the key on the base again
or any key on the handset.
You can page the handset from the base unit
making it ring with a special tone. It's useful to
locate a lost handset.
Press the key on the base unit (less than 5
seconds), all the handsets registered to the
base will ring for about 60 seconds.
You can select to change the dial mode by the
following steps:
1. Press the soft key.
2. Press the key repeatedly to choose
, and press the soft key.
3. Use the key to choose , then
press the soft key.
Menu
BS
Settings Select
Dial Mode
Select
4. You can press the key to select the required
dial mode options ( / ) and press the
soft key. A confirm beep will be heard.
Tone Pulse
Save
Note:
If you are not sure which dialing mode to
select, please contact your local service
provider.
Note:
On a long key press, more than or equal to
5 seconds, the base will enter subscription
mode. For details, see page 38.