User's Manual Part 2

19
38
n Registration
The supplied handset is already registered with
the number 1.
in order to share the same line
with other people.
you
should press and hold base unit key for about
5 seconds then release it
3. Use the key to scroll through the Base
names list, press the soft key to
choose a base to your necessary. The
handset will search for the requested base
and the relevant information will flash on
the LCD.
Before registering a handset to the base,
.
Registration
Select
You can register up to 5 handsets
to your base unit
soft keySelect
1. Press the soft key.
2. Press the key to choose ,
then press the .
Menu
4. If the base is found, and the handset is
successfully registered, you will be prompted
to enter the PIN code (the default one is 0000).
On validation of the PIN code, the
Registration tone will sound and the Base
assigns a number to the handset. If the PIN
code entered is invalid, a warning tone will
sound, and the handset will return to the
previous registration state.
5. If the base is not found, the handset will
behave according to the Out of Range
condition.
n CID Book
2. Use the soft key to choose the ,
and if available, the numbers are displayed. (You
can also access the CID book directly by pressing
the key in standby mode.)
Select CID Book
Up
3. Use the key to view the numbers, you can
make a call by a press of the key. You can
also add the entry to the phonebook.
When you receive a call, if the caller's
information is transmitted from the network on
which the call was made (and the caller doesn't
hide it), the caller's phone number is displayed.
Moreover, when there is a received call which
you missed, the icon will appear on the LCD.
If the CID memory is full, the icon will blink
on the LCD.
Out Of Area
Private
Menu
- This message will display when
someone calls from an area where the
telephone company is not offering the caller
identification services or is not yet providing
number delivery to your area.
- If the caller has exercised the option
to prevent his name and number from being
sent, the message will show on the LCD.
1. Press the soft key.
View and dial any of the CID
numbers
Note:
At step 3, each item of the incoming list is
marked with the icon if the call has been
reviewed or with the icon if the call hasn't
been reviewed yet.
Add CID Number to Phone Book
1. Perform steps 1 and 2 of previous paragraph.
2. Use the key to view the numbers, when the
desired number displays on the LCD, Press the
soft key to enter menu.
3. Press the soft key, you are prompted to
enter the name.
More Add to PB
Select