Installation Instructions

Shenzhen Xingkai Technology Co., Ltd
3
Disclaimer
Welcome to use our products！
Ensure that the product is used in accordance with local laws and regulations. The
company will not bear any legal liability for any result or loss caused by illegal use,
installation and modification of the product。Please use this product carefully
according to the process and precautions in this manual. If the product is damaged
due to disassembly, impact, unconventional operation and other factors, our
company will not provide the service of return and free maintenance.
The copyright of this manual belongs to Shenzhen Xingkai Technology Co., Ltd.
No one may make copies without written consent.
Caution
In order to ensure the correct use of the product and the best use effect, please
read this manual carefully before operating the product, and follow the relevant
operation procedures and precautions to avoid damage to the equipment or poor
use effect due to misoperation or improper use. Operators should have a certain
basic knowledge of communication electronics. When installing and using this
product, please pay attention to the following precautions.
. FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for co
mpliance could void the user’s authority to operate the equipment. This equipment h
as been tested and found to comply with the limits for a Class B digital device, pursua
nt to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec
tion against harmful interference in a residential installation. This equipment generat
es uses and can radiate radio frequency energy and, if not installed and used in accor
dance with the instructions, may cause harmful interference to radio communication
s. However, there is no guarantee that interference will not occur in a particular instal
lation. If this equipment does cause harmful interference to radio or television recept
ion, which can be determined by turning the equipment off and on, the user is encou
raged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to whic
h the receiver is connected.