Installation Instructions

Shenzhen Xingkai Technology Co., Ltd
26
short, which is not up to expectation?
Please follow the following steps:
1) Please verify whether the antenna and RF cable are installed correctly, check
whether they are Xingkai standard materials.
2) Please ensure that the antennas installation of air unit is not blocked by the
payload, and there is no obvious blocking at the ground unit near the antennas, and the
antennas of the air and ground units are perpendicular to the ground.
3) Please check whether the RF power is reduced, not to achieve full RF power.
4) Please check whether the downlink mode configuration is reasonable or not, the
high-speed downlink mode will significantly reduce the transmission distance;
5) Please check whether the working frequency is obviously interferenced or not,
Figure 6.4.2 introduces how to select working frequency.
6) Please check whether there is serious obstruction between the air and the ground
unit during flighting, and the complex geographical environment will affect the
transmission distance.
7) If the above steps can not solve the problem, please contact Xingkai technical
support staff.
If you have any questions about this document, please contact Xingkai by sending a
message to
[e-mail]. You can also visit http://en.xingkaitech.com .