Installation Instructions

Shenzhen Xingkai Technology Co., Ltd

correct. We provides standard cables. If you make it by yourself, please check the pin.

5) Check whether the baud rate is configured correctly with Xingkai PC management

software.

6) If the above steps can not solve the problem, please contact Xingkai technical

support staff.

Q9: After connecting Xingkai module, RC can not be connected properly?

Please follow the following steps:

1) Please check whether the link state is normal, please refer to Question 4 and

Question 5 if it is abnormal.

2) Please check whether the RC port both the air and the ground units is correct.

3) Please check whether the RC connecting between flight controller and air unit is

correct and that between ground unit and remote contriller is correct.

4) If using PPM mode, check the mode configuration of the remote controller. if using

S.BUS mode, check the configuration of the receiver and remote controller.

5) Please check whether the RC connection of the air and ground unit is correct. We

provides standard cables. If you make it by yourself, please check the pin.

6) Please check whether the RC mode is configured correctly with Xingkai PC

management software.

7) If the above steps can not solve the problem, please contact Xingkai technical

support staff.

Q10: After connecting Xingkai module, video can not be output properly?