Installation Instructions

Shenzhen Xingkai Technology Co., Ltd

Please follow the following steps:

1) Please check whether the power supply of the air and ground unit is normal.

2) Please check whether the RJ45 cable is normal.

3) If the above steps can not solve the problem, please contact Xingkai technical

support staff.

Q7: What if the ethernet data link LED indicator is not on?

Please follow the following steps:

1) Please check whether the ethernet physical link LED indicator is on.

2) Please check whether the cameras, pods and other equipment are working

properly.

3) If the above steps can not solve the problem, please contact Xingkai technical

support staff.

Q8: After connecting Xingkai module, telemetry can not be connected properly?

Please follow the following steps:

1) Please check whether the link state is normal, please refer to Question 4 and

Question 5 if it is abnormal.

2) Please check whether the telemetry port both the air and the ground units is

correct.

3) Please check whether the connecting between flight controller and air unit is

correct and that between ground unit and ground station is correct.

4) Please check whether the telemetry connection of the air and ground unit is