Installation Instructions

Shenzhen Xingkai Technology Co., Ltd

Notes for version upgrade:

a) During the version upgrade process, the power supply cannot be turned off,

otherwise the device will not start normally.

b) When the baseband version and firmware version need to be upgraded at

the same time, first upgrade the baseband version and then upgrade the

firmware version.

c) The firmware files of air unit and ground unit should be the same when

upgrading, and the equipment model should be corresponding, Otherwise,

the pairing will not succeed.

d) After upgrading, the device needs to be paired again. You can choose

physical pairing or software pairing. The pairing method is as follows:

Physical pairing steps:

First of all, press the binding button on the air unit for 3 seconds, and the prompt

light will flash!

Then press the binding button on the ground unit for 3 seconds, and the prompt

light will flash.

Wait 4 to 5 seconds for the pairing to succeed.

Software pairing steps:

On the software app, the air unit will start pairing first, and then the ground unit

will start pairing. After 10 seconds, the device will be turned on Power off, and

then power on without error prompt, the pairing is successful.

7. Network decoding settings

a) Computer IP settings