Installation Instructions

Shenzhen Xingkai Technology Co., Ltd
13
Figure 6.3 "current status" interface
Read the status information of air unit and ground unit, and read signal strength,
uplink and downlink speed and baseband temperature. The larger the value of signal
strength, the better the signal is. The rate of uplink and downlink will be displayed
only when the image is passed.
6.4 "configure" interface
When configuring parameters, both units must be in the binding state.
Parameter configuration includes: encryption setting, downlink mode, serial port
baud rate, remote control mode, data transmission interface type, etc. For example,
there are two types of encryption settings: aes128 and aes256. Key input supports
symbols, letters, numbers and other data. Aes128 must set 16 bit data to successfully
encrypt, and aes256 must set 32-bit data to successfully encrypt (only need to set
the ground unit).