User Instructions

①
③
⑤
⑥
⑦
⑧
⑫
⑬
②
④
⑨
⑩
⑪
⑭
①DISPLAY:
(a)If the display is OFF, press the button would wake up the display,
And the display show the status of fan, light or timing by flickering.
(b)If the display is ON, the display would be bright for 10s and show
the status of fan, light or timing after you press the button.
②F/R: Press and hold the button for 2s to change the direction of
fan. And the display would show the direction of fan.
(Forward/Summer: Reversal/Winter: )
③NATURAL WIND ON/OFF:
(a)The natural wind mode: the fan run from speed level 1 increase
to level 3 slowly in 10s, and then from speed level 3 decrease to
level 1 slowly in 10s, and so on.
(b)If the fan is OFF, this button is useless. The display will show the
fan speed when you press this button.
(c)If the fan is ON, but is not in the natural wind mode, the fan will
be enter the natural wind mode when you press this button. And
the display will show
(d)If the fan is ON and is in the natural wind mode, the fan will exit
the natural wind mode and run in the last speed when you press this
button. And the display will show the fan speed.
④TIMING:
(a)If the fan is OFF, this button is useless, The display will show "0"
when you press this button.
(b)If the fan is ON or is in the natural wind mode, it will set the
timing increase 1 hour when you press this button. And the display
will show the timing.(The timing of display cycles from 0 to 9.)
(c)If the fan is ON or is in the natural wind mode, it will cancel the
timing when you press and hold on this button for 2s. And the
display will show “0”.
(d)If the fan turns off during timing, the timing will be canceled.
(e)The timing of display is not cleared to “0” after the timing is over.
INSTRUCTION FOR REMOTE CONTROLLER
MODE:NN13T4 SERIES