User manual

4 Installation:
XILS-Lab offers you the choice of using an eLicenser, or an iLok.
4.1 eLicenser drivers:
The XILS 4 uses an eLicenser dongle. You must have this dongle connected to a USB port on your
computer to make the XILS 4 work.
Important : Please take care of your dongle. You need it to run the XILS 4, as it carries your license!
4.1.1 If you already own a eLicenser:
Please Note: Even if you have already installed the eLicenser drivers for a previous product, please install the
latest version of the eLicenser License Control.
To download the latest eLicenser Control Center (eLC), please go to:
http://www.elicenser.net/en/latest_downloads.html
You will need a XILS 4 Activation Code, to load your license onto the dongle:
First, plug your dongle into a USB port of your computer, then launch the License Control Center. Launch the
Enter authorization code. Enter your Activation Code in the reserved field, and press Next.
Wait for the license to be downloaded, and then check to see if the license is correctly loaded on to the
dongle, in the main section of the License Control Center.
4.1.2 If you have received a eLicenser dongle from XILS-lab:
You must first install the eLicenser drivers (eLicenser Control Center, eLC).
To download the latest eLC please go to:
http://www.elicenser.net/en/latest_downloads.html
You can then plug your dongle into any free USB port on your computer. Launch the License Control Center,
then enter the authorization code you have received, as explained above.
4.2 iLok drivers:
To use the iLok version of the XILS 4, you need to plug an iLok USB key into your computer.
After downloading and installing the latest PACE drivers, please login into your ilok.com account, to
download your XILS 4 license on to your iLok USB key. You may need to redeem the license, using the
license code you received. Follow the “redeem license code” link in your ilok.com account)
To download the latest PACE drivers, please go to:
http://www.ilok.com/download-ilok-software.html