User manual
Table Of Contents
- 1 Introduction
- 2 XILS 4 Features:
- 3 Digital Audio Workstation compatibility:
- 4 Installation:
- 5 Quick Start
- 6 Preset Management:
- 7 XILS 4 GUI description
- 8 XILS 4 common GUI description:
- 9 XILS 4 Matrix description:
- 10 XILS 4 Trig connection description
- 11 XILS 4 Synthesizer routing:
- 12 XILS 4 modules description:
- 13 Option menu:
- 14 Credits:
12.6.2 Chorus:
DRY/WET: Sets the mix balance between the initial signal and the processed signal.
SPEED: Sets the rate of the internal low frequency oscillator of the chorus.
AMOUNT: Sets the amount of the effect.
TYPE: Toggles through the three available types of chorus.
12.6.3 Phaser:
DRY/WET: Sets the mix balance between the initial signal and the processed signal.
SPEED: Sets the rate of the internal low frequency oscillator of the phaser..
AMOUNT: Sets the amount of the effect. Use this to set the intensity of the internal filter sweep.
SWEEP: Sets the centre frequency around which the sweep is performed.
RES: Sets the amount of the internal audio feedback, or resonance.
STEREO: Sets the phase difference between the right and the left channel.