User manual

1 Introduction
Thank you for choosing the XILS 4.
The XILS 4 is a virtual instrument, based on the architecture of a classic matrix modular synthesizer.
Modularity and the Modulation Matrix are the basis of these synthesizers: Up to 1080 connections are
available to build any synthesizer structure, using many finely emulated synthesis modules.
The XILS 4 is based on two main Synthesizers, with hard synchronization available between the
oscillators. It also incorporates a 3-layer sequencer.
The left-hand example shows
the Main Matrix, with 16 inputs
and 16 outputs. The right-hand
example shows the Extended
Matrix, with 15 inputs and 15
outputs.
Other matrices are available
for connecting the sequencer,
and/or the various trig signals.
“like” us on Facebook http://www.facebook.com/XILSLabs and join in the conversation.
Note 1: We plan to release a series of tutorial videos to help you to get the most out of XILS 4.
When available, you will be able to view these videos on our YouTube channel.
Please visit:http://www.youtube.lcom/user/xilslab
Note 2: If you have a question about the XILS 4, we strongly encourage you to join, then post on the Xils-
Lab forum: http://www.xils-lab.com/xo_phpBB/.
Posting on our forum is the fastest way to get an answer, if you experience some trouble with XILS 4.
If you also need information about a specific subject, or want to exchange ideas or patches with other
Xilsonauts, it is the best way to get connected to the Xils-lab world.