User manual

Finally, in this keyboard panel you will fine the GLOBAL LEVEL, which is applied after all the internal
treatment. The GLOBAL TUNE, which sets the overall tuning of the synthesizer, is also found here.
Please note this parameter is a global parameter, and is not saved within a preset.
The ANALOG knob increases or decreases the internal instability of the modules emulating the random
variance of vintage equipment.
The GLIDE TIME sets the rate at which the keyboard will alter its pitch control information.
12.5 Input modules:
When using the XILS 4 as an effect processor, the input travels through the Input modules, before being
sent to the Main matrix.
These input modules can also be used as new modulation sources.
12.5.1 Transient follower:
The transient follower provides a trig information (to be used in the keyboard trig matrix) as well as an
envelope-like control signal: The RELEASE knob sets the time this control takes to return to zero, after a
transient has been detected.
The SENSITIVITY knob sets the sensitivity of the transient detection: more detection occurs when turned
to the right, and less when turned to the left.
LVL OUT sets the level of this control signal.
12.5.2 Envelope follower:
The envelope follower provides an envelope-like control signal: The ATTACK and RELEASE knobs set the
time this control takes to raise the input signal level, then to return to zero after the input signal has
ceased.