User manual
Table Of Contents
- 1 Introduction
- 2 XILS 4 Features:
- 3 Digital Audio Workstation compatibility:
- 4 Installation:
- 5 Quick Start
- 6 Preset Management:
- 7 XILS 4 GUI description
- 8 XILS 4 common GUI description:
- 9 XILS 4 Matrix description:
- 10 XILS 4 Trig connection description
- 11 XILS 4 Synthesizer routing:
- 12 XILS 4 modules description:
- 13 Option menu:
- 14 Credits:
(Keyboard or Sequencer) is connected to the LFO.
12.2.3 Sample and Hold:
This very useful module allows the sampling of its input, and holds it over until it receives the next clock.
If no input is selected, then a white noise is used instead. The Input and Output must be connected in the
advanced matrix, by using the drop-down menus.
RATE : Sets the frequency of the Sample & Hold.
SYNC : When engaged, this switch synchronizes the
frequency to a multiple or sub-multiple of the DAW
tempo.
LEVEL : Sets the output level of the Sample & Hold.
12.2.4 Voltage Processor:
This module allows the delay and/or modification of any modulation (or audio rate), by applying a attack-
release process.
DELAY : Sets the internal delay between input and
output.
ATTACK : Sets the attack time.
RELEASE : Sets the release time.
LEVEL : Sets the output level of the Voltage
Processor.