User manual

LEVEL: this knob sets the output level of the ring
modulator.
RMV DC: By clicking on this check box, you remove
any DC component of the input ring modulator
signals.
By connecting the Joystick to one of the inputs, the
effect can be heard only while moving it. Otherwise
the level is null
12.1.6 Reverb:
A monophonic spring reverb unit is available. This means that any polyphonic sounds will be mixed
together before being sent to the reverb unit. The output of the reverb can, however, be used as an input
for polyphonic modules.
LEVEL: This knob sets the output level of the
Reverb.
MIX: This knob balances the mix between the dry
and the wet signals.
TYPE: This switch sets the Reverb type.
12.1.7 Output filter:
There is a static filter, which can be set to either low pass or high pass, for each of the two outputs, left
and right. This filter can be useful for limiting some high frequencies, or removing rumble, while
maintaining an otherwise full range for the dynamic filter.
The two knobs set the cut-off frequency of the filters
and the switch selects the type; high-pass or low-
pass.
When the switch is set to the centre, no filter is
activated.
12.1.8 Input Level:
The XILS 4 can also be used as a versatile audio
effect processor.
In this case, the Audio Input of the plugin is directed
into the Main matrix, and the level can be adjusted
with these two knobs.