User manual
Table Of Contents
- 1 Introduction
- 2 XILS 4 Features:
- 3 Digital Audio Workstation compatibility:
- 4 Installation:
- 5 Quick Start
- 6 Preset Management:
- 7 XILS 4 GUI description
- 8 XILS 4 common GUI description:
- 9 XILS 4 Matrix description:
- 10 XILS 4 Trig connection description
- 11 XILS 4 Synthesizer routing:
- 12 XILS 4 modules description:
- 13 Option menu:
- 14 Credits:
As shown in the picture below, a “trig” is a one-pulse information event for initiating an envelope cycle,
resetting a LFO, or starting a sequencer. A “gate” is a pulse with a certain width. For example, when you
play a note on the keyboard, the gate signal it generates stays on until the note is no longer held down.
From the sequencer, the gate length is dependent on the “sustain” knobs (see the sequencer chapter).
Details will be explained in the chapter relating to those particular modules which require a trig or gate.