User manual
Table Of Contents
- 1 Introduction
- 2 XILS 4 Features:
- 3 Digital Audio Workstation compatibility:
- 4 Installation:
- 5 Quick Start
- 6 Preset Management:
- 7 XILS 4 GUI description
- 8 XILS 4 common GUI description:
- 9 XILS 4 Matrix description:
- 10 XILS 4 Trig connection description
- 11 XILS 4 Synthesizer routing:
- 12 XILS 4 modules description:
- 13 Option menu:
- 14 Credits:
In the Sequencer/Modules panel, you can switch between several tabs to display various functions:
Env/LFO, Inputs, Effects, Sequencer, and Sequencer connections.
In the same way, you will find a tab to display either the keyboard trig matrix, or the keyboard controls
(velocity, mod. wheel ranges, etc)
9 XILS 4 Matrix description:
All the XILS 4 audio paths and trigs are done with the matrix, so having some information regarding this
major component is important.
A matrix is a component that allows you to connect the output of one module to the input of another.
In all the XILS 4 matrices, outputs are listed in the horizontal row, and the inputs in the vertical column.
Placing a pin will connect the corresponding output to the corresponding input.
Input or output can be an audio signal (oscillators, filters,) or control signals (Trapezoid, Stick, Osc
Frequency, Filter frequency,...)
There is no limitation, you can always connect audio signal outputs to control inputs, and it will be
accepted at it's audio rate.