Inc. Portable Generator User Manual

Use of mixed language projects 131
System Generator Software Features
enter information describing clocks, parameter names, types and values as
appropriate.
Figure 4-2: Black Box block parameters dialog box
Creating mixed language synthesis and simulation projects
The following describes how to synthesize mixed language designs using Synplify
and Leonardo Spectrum synthesis compilers, and how to test using the ModelSim
simulator. The XST synthesis compiler does not support mixed language designs.
To synthesize using Synplify, open the project file (for example,
my_project_synplicity.prj) in Synplify. Tell thetool toadd yourblack boxfiles
to the project. The procedure for a Leonardo Spectrum project is analogous, except
that the project filename example is my_project_leon.tcl.
To run a behavioral simulation in ModelSim, edit the vcom.do and vsim.do files
that were produced by System Generator. The vcom.do file must be augmented with
lines to compilethe blackbox VHDL and Verilog. Foreach black box VHDLfile, adda
line of the form
vcom <file>
where <file> is the name of the file. Similarly, each Verilog file needs a line of the
form
vlog <file>
In addition, you must add a