ML510 QuickStart August 2008
Overview • • • • • Setup Boot with ACE-loader ACE File Observe LCD and Terminal messages Load new Configuration Re-load ACE-loader
ML510 BSB DIMM0 Hardware • The ML510 MicroBlaze design hardware includes: – – – – – – – – – – – DDR2 Interface (512 MB) BRAM External Memory Controller (EMC) Networking UART Interrupt Controller GPIO EEPROM (IIC and SPI) Timer System ACE CF Interface PLB Arbiter Note: Presentation applies to the ML510
ML510 BSB DIMM0 Hardware • The ML510 PPC440 design hardware includes: – – – – – – – – – – – DDR2 Interface (512 MB) BRAM External Memory Controller (EMC) Networking UART Interrupt Controller GPIO EEPROM (IIC and SPI) Timer System ACE CF Interface PLB Arbiter Note: Presentation applies to the ML510
ML510 BSB DIMM1 Hardware • The ML510 MicroBlaze design hardware includes: – – – – – – – – DDR2 Interface (512 MB) BRAM Networking UART Interrupt Controller Timer System ACE CF Interface PLB Arbiter Note: Presentation applies to the ML510
ML510 BSB DIMM1 Hardware • The ML510 PPC440 design hardware includes: – – – – – – – – – – – DDR2 Interface (512 MB) BRAM External Memory Controller (EMC) Networking UART Interrupt Controller GPIO EEPROM (IIC and SPI) Timer System ACE CF Interface PLB Arbiter Note: Presentation applies to the ML510
ML510 Dual Processor Hardware • • • The ML510 Dual Processor design hardware includes: PPC440_0: – – – – – – – – – – DDR2 Interface (512 MB) BRAM (64 KB) External Memory Controller Networking UART Interrupt Controller GPIO EEPROM (IIC and SPI) System ACE CF Interface PLB Arbiter PPC440_1: – – – – – – DDR2 Interface (512 MB) BRAM (64 KB) Networking UART Interrupt Controller PLB Arbiter Note: Presentation applies to the ML510
Additional Setup Details • Refer to ml510_overview_setup.
Hardware Setup • Connect the Xilinx Parallel Cable IV (PC4) to the ML510 board • Connect the RS232 null modem cable to the ML510 board Note: Presentation applies to the ML510
Hardware Setup • The ML510 uses a DVI video interface • Connect a DVI monitor or • Use a DVI/VGA adapter to connect a VGA monitor – http://www.belkin.
Hardware Setup • USB Keyboard – www.dell.
Software Setup • Start a Terminal Program for each UART: Note: Presentation applies to the ML510
Factory CompactFlash • The CompactFlash shipped with the ML510 board has the following ace files preloaded: Note: Presentation applies to the ML510
Network Setup • Set PHY0 Jumpers • MII – Connect pins 1 & 2 on J50 and J28 • RGMII – Connect pins 1 & 2 on J50; connect J49 Note: Refer to the ML510 User Guide – UG356 for details
CompactFlash Setup • Insert the CompactFlash provided with the ML510 fully into the CompactFlash slot on the ML510 board
Equipment Setup • Set SW3 DIP Switches to 00010101 (1 = ON) • Power-up the ML510 board Note: Presentation applies to the ML510
ACE–Loader • The terminal window also reflects the ACE-loader application • Type the desired number in the terminal window to choose an application • After each demo, push the SysACE reset to return to bootload Note: Presentation applies to the ML510
CF1 – TestApp Peripheral • Type 1, to launch the TestApp Peripheral DIMM0 design – Set jumpers for MII; takes several minutes to complete Note: MicroBlaze DIMM0 Design
CF2 – VxWorks DIMM0 • Type 2, to launch the VxWorks on the Pcore DIMM0 design Note: PPC440 DIMM0 Design
CF3 – TestApp Peripheral • Type 3, to launch the TestApp Peripheral DIMM1 design – View on COM2; takes several minutes to complete Note: MicroBlaze DIMM1 Design
CF4 – VxWorks DIMM1 • Type 4, to launch the VxWorks on the BSB DIMM1 design Note: PPC440 DIMM1 Design
CF5 – Dual VxWorks • Type 5, to launch the Dual Processor VxWorks design – Set jumpers for RGMII Note: Dual PPC440 Design
CF6 – My ACE • Type 6, to launch the placeholder design, my_ace – Same message appears on the Monitor Note: PPC440 Pcore DIMM0 Design
CF7 – Slideshow • Type 7, to launch the slideshow application • The slideshow loads the presentation into memory then presents it Note: Presentation applies to the ML510
Slideshow • The slideshow app will present a series of slides on the Monitor: Note: Presentation applies to the ML510
Documentation • Virtex-5 – Silicon Devices http://www.xilinx.com/products/silicon_solutions – Virtex-5 Multi-Platform FPGA http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5 – Virtex-5 Family Overview: LX, LXT, SXT, and FXT Platforms http://www.xilinx.com/support/documentation/data_sheets/ds100.pdf – Virtex-5 FPGA DC and Switching Characteristics Data Sheet http://www.xilinx.com/support/documentation/data_sheets/ds202.
Documentation • Virtex-5 – Virtex-5 FPGA User Guide http://www.xilinx.com/support/documentation/user_guides/ug190.pdf – Virtex-5 FPGA Configuration User Guide http://www.xilinx.com/support/documentation/user_guides/ug191.pdf – Virtex-5 System Monitor User Guide http://www.xilinx.com/support/documentation/user_guides/ug192.pdf – Virtex-5 Packaging and Pinout Specification http://www.xilinx.com/support/documentation/user_guides/ug195.
Documentation • Virtex-5 RocketIO – RocketIO GTP Transceivers http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5/ capabilities/RocketIO_GTP.htm – RocketIO GTX Transceivers http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5/ capabilities/RocketIO_GTX.htm – RocketIO GTP Transceiver User Guide – UG196 http://www.xilinx.com/support/documentation/user_guides/ug196.pdf – RocketIO GTX Transceiver User Guide – UG198 http://www.xilinx.com/support/documentation/user_guides/ug198.
Documentation • Design Resources – ISE Development Tools and IP http://www.xilinx.com/ise – Integrated Software Environment (ISE) Foundation Resources http://www.xilinx.com/ise/logic_design_prod/foundation.htm – ISE Manuals http://www.xilinx.com/support/software_manuals.htm – ISE Development System Reference Guide http://toolbox.xilinx.com/docsan/xilinx10/books/docs/dev/dev.pdf – ISE Development System Libraries Guide http://toolbox.xilinx.com/docsan/xilinx10/books/docs/virtex5_hdl/virtex5_hdl.
Documentation • Additional Design Resources – Customer Support http://www.xilinx.com/support – Xilinx Design Services: http://www.xilinx.com/xds – Titanium Dedicated Engineering: http://www.xilinx.com/titanium – Education Services: http://www.xilinx.com/education – Xilinx On Board (Board and kit locator): http://www.xilinx.
Documentation • Platform Studio – Embedded Development Kit (EDK) Resources http://www.xilinx.com/edk – Embedded System Tools Reference Manual http://www.xilinx.com/support/documentation/sw_manuals/edk10_est_rm.pdf – EDK Concepts, Tools, and Techniques http://www.xilinx.com/support/documentation/sw_manuals/edk_ctt.
Documentation • PowerPC 440 – PowerPC 440 Processor http://www.xilinx.com/powerpc – Embedded Processor Block in Virtex-5 FPGAs Reference Guide – UG200 http://www.xilinx.com/support/documentation/user_guides/ug200.pdf – PPC440 Virtex-5 Wrapper – DS621 http://www.xilinx.com/support/documentation/ip_documentation/ ppc440_virtex5.pdf – DDR2 Memory Controller for PowerPC 440 Processors – DS567 http://www.xilinx.com/support/documentation/data_sheets/ds567.
Documentation • MicroBlaze – MicroBlaze Processor http://www.xilinx.com/microblaze – MicroBlaze Processor Reference Guide – UG081 http://www.xilinx.com/support/documentation/sw_manuals/mb_ref_guide.
Documentation • Memory Solutions – Demos on Demand – Memory Interface Solutions with Xilinx FPGAs http://www.demosondemand.com/clients/xilinx/001/page_new2/index.asp#35 – Xilinx Memory Corner http://www.xilinx.com/products/design_resources/mem_corner – Additional Memory Resources http://www.xilinx.com/support/software/memory/protected/index.htm – Xilinx Memory Interface Generator (MIG) 2.2 User Guide http://www.xilinx.com/support/documentation/ip_documentation/ug086.
Documentation • ChipScope Pro – ChipScope Pro 10.1i Serial IO Toolkit User Manual http://www.xilinx.com/ise/verification/chipscope_pro_siotk_10_1_ug213.pdf – ChipScope Pro 10.1i ChipScope Pro Software and Cores User Guide http://www.xilinx.com/ise/verification/chipscope_pro_sw_cores_10_1_ug029.
Documentation • Ethernet – Virtex-5 Embedded Tri-Mode Ethernet MAC Wrapper Data Sheet http://www.xilinx.com/support/documentation/ip_documentation/ v5_emac_ds550.pdf – Virtex-5 Embedded Tri-Mode Ethernet MAC Wrapper Getting Started Guide http://www.xilinx.com/support/documentation/ip_documentation/ v5_emac_gsg340.pdf – Virtex-5 Tri-Mode Ethernet Media Access Controller User Guide http://www.xilinx.com/support/documentation/user_guides/ug194.
Documentation • PLB v4.6 IP – Processor Local Bus (PLB) v4.6 Data Sheet – DS531 http://www.xilinx.com/support/documentation/ip_documentation/plb_v46.pdf – Multi-Port Memory Controller (MPMC) – DS643 http://www.xilinx.com/support/documentation/ip_documentation/mpmc.pdf – XPS Multi-CHannel External Memory Controller (XPS MCH EMC) – DS575 http://www.xilinx.com/support/documentation/ip_documentation/ xps_mch_emc.pdf – XPS LocalLink TEMAC – DS537 http://www.xilinx.
Documentation • PLB v4.6 IP – XPS IIC Bus Interface – DS606 http://www.xilinx.com/support/documentation/ip_documentation/xps_iic.pdf – XPS SYSACE (System ACE) Interface Controller – DS583 http://www.xilinx.com/support/documentation/ip_documentation/xps_sysace.pdf – XPS Timer/Counter – DS573 http://www.xilinx.com/support/documentation/ip_documentation/xps_timer.pdf – XPS Interrupt Controller – DS572 http://www.xilinx.com/support/documentation/ip_documentation/xps_intc.
Documentation • PLB v4.6 IP – XPS General Purpose Input/Output (GPIO) – DS569 http://www.xilinx.com/support/documentation/ip_documentation/xps_gpio.pdf – XPS External Peripheral Controller (EPC) – DS581 http://www.xilinx.com/support/documentation/ip_documentation/xps_epc.pdf – XPS 16550 UART – DS577 http://www.xilinx.com/support/documentation/ip_documentation/ xps_uart16550.pdf – PLBV46 to DCR Bridge Data Sheet – DS578 http://www.xilinx.com/support/documentation/ip_documentation/ plbv46_dcr_bridge.
Documentation • IP – Local Memory Bus Data Sheet – DS445 http://www.xilinx.com/support/documentation/ip_documentation/lmb_v10.pdf – Block RAM Block Data Sheet – DS444 http://www.xilinx.com/support/documentation/ip_documentation/bram_block.pdf – Microprocessor Debug Module Data Sheet – DS641 http://www.xilinx.com/support/documentation/ip_documentation/mdm.pdf – LMB Block RAM Interface Controller Data Sheet – DS452 http://www.xilinx.com/support/documentation/ip_documentation/ lmb_bram_if_cntlr.
Documentation • IP – JTAGPPC Controller Data Sheet – DS298 http://www.xilinx.com/support/documentation/ip_documentation/jtagppc_cntlr.pdf – Processor System Reset Module Data Sheet – DS402 http://www.xilinx.com/support/documentation/ip_documentation/ proc_sys_reset.pdf – Clock Generator v2.0 Data Sheet – DS614 http://www.xilinx.com/support/documentation/ip_documentation/ clock_generator.pdf – Util Bus Split Operation Data Sheet – DS484 http://www.xilinx.
Documentation • ML510 – ML510 Overview http://www.xilinx.com/ml510 – ML510 Evaluation Platform User Guide – UG356 http://www.xilinx.com/support/documentation/boards_and_kits/ug356.pdf – ML510 Reference Design User Guide – UG355 http://www.xilinx.com/support/documentation/boards_and_kits/ug355.pdf – ML510 Quickstart Tutorial http://www.xilinx.com/products/boards/ml510/docs/ml510_quickstart.
Documentation • ML510 – ML510 Schematics http://www.xilinx.com/support/documentation/boards_and_kits/ ml510_schematics.pdf – ML510 Bill of Material http://www.xilinx.com/support/documentation/boards_and_kits/ml510_bom.
