Inc. PLB PCI Full Bridge Product Specification

PLB PCI Full Bridge (v1.00a)
DS508 March 21, 2006 www.xilinx.com 13
Product Specification
E
AR
L
Y
ACCESS
G61
Include configuration
functionality via IPIF
transactions
C_INCLUDE_
PCI_CONFIG
0 = Not included
1 = Included
1 integer
G62
Number of IDSEL
signals supported
C_NUM_
IDSEL
1 to 16 8 integer
G63
PCI address bit that PCI
v3.0 core IDSEL is
connected to
C_BRIDGE_
IDSEL_ADDR_
BIT
31 down to 16
Must be <= 15 +
C_NUM_IDSEL.
AD(31 down to 0) index
labeling
16 integer
IPIF Parameters Group
G64
PLB master ID bus
width (set automatically
by XPS)
C_PLB_MID_
WIDTH
log
2
(C_PLB_NUM_MA
STERS)
3 integer
G65
Number of masters on
PLB bus (set
automatically by XPS)
C_PLB_NUM_
MASTERS
1-16 8 integer
G66 PLB Address width
C_PLB_
AWIDTH
32 (only allowed value 32 integer
G67 PLB Data width
C_PLB_
DWIDTH
64 (only allowed value 64 integer
G68
Specifies the target
technology
C_FAMILY
See PLB IPIF data
sheet
virtex2 string
Notes:
1. The range specified must comprise a complete, contiguous power of two range, such that the range = 2
n
and
the n least significant bits of the Base Address are zero.
2. The minimum address range specified by C_BASEADDR and C_HIGHADDR must be at least 0x1FF.
C_BASEADDR must be a multiple of the range, where the range is C_HIGHADDR - C_BASEADDR + 1.
Table 1: PLB PCI Bridge Interface Design Parameters (Contd)
Generic
Feature /
Description
Parameter
Name
Allowable Values
Default
Value
VHDL
Type