Operation Manual

7
Connection of External Power Supply
EMC ferrite bead can be applied on power lines to prevent external disturbance from entering radio via power lines and radio-frequency
interference in radio from radiating externally via power lines when external power supply is adopted for G106. Ferrite bead shall be installed at
the side closing to power plug to greatest extent.
■ Polarity of power lines shall be carefully inspected to avoid reverse polarity connection when external power supply is adopted.
■ The limited warranty of the radio does not cover damage caused by an error in external power connection or damage caused by an
abnormal power voltage.
Wind the power line around
the ferrite bead twice.
As close to the interface as possible