Operation Manual

Instructions for External Interface Connection

1. MIC interface

Front Panel Facing G106

Note: There is a bias voltage at the MIC end, so it shall not be short-

circuited.

2. COM interface

3. ACC interface

4. Key wiring diagram

Connect straight key/ morse key according to the diagram shown

in the figure above.

Note:

● If the connector of the straight key is a 6.5mm 2-pole plug, please

change it to a 3-pole 3.5mm stereo plug according to the wiring method

shown in the figure above, and connect the trigger end of the morse key to

the "Di" or "Da" terminal.

● Take care that direct use of the 2-pole to 3-pole adapter or incorrect

wiring may result the radio in CW transmission status all the time!

DaD