Operation Manual

21
Appendix 1
Computer control instructions
G106 adopts CI-V instruction sets. You can remotely control the transceiver based on standard instructions of the instruction set or configure
control instructions of other software to enable the control over G106.
Wave band voltage data
The ACC interface of G106 provides wave band data of four frequency bands, which can control the peripheral device to automatically switch
the wave band or identify the wave band information for other devices.
Wave
Band
Voltage
Wave
Band
Voltage
Wave
Band
Voltage
Wave
Band
Voltage
/
/
7MHz
920mV
18MHz
1610mV
28MHz
2300mV
3.5MHz
460mV
10MHz
1150mV
21MHz
1840mV
/
/
5.0MHz
690mV
14MHz
1380mV
24MHz
2070mV
/
/