Operation Manual

Operation

Set display mode

The display mode of the main interface of G106 can be set and the operation method is as follows:

1. Call the multi-function menu [4/5], and choose the DIS function to go to the display mode selection interface where three display modes, i.e.

SCOPE+S, SCOPE and BIG SCOPE, are available:

SCOPE+S: display mode of spectrum + S table

SCOPE: display mode of spectrum only

BIG SCOPE: display mode of large format spectrum

2. Turn the main knob to select the desired display mode, press SAVE to save and exit. About 5s later, the interface will automatically switch to

the normal display state.

Tips:

■ If the bottom menu is already displayed, you may short-press the main knob to quickly return to the spectrum display state.

Enable/ disable keypad tone

Operation methods:

Call the multi-function menu [4/5], choose the BP function and press the BP function button again to enable/ disable the keypad tone.