Operation Manual

16
Operation
Channel storage and clearing
Operation methods:
Store channel:
1. Select the desired frequency and set the relevant mode, status and
other items.
2. Call the multi-function menu [1/5] and select the MW function. Turn
the main knob to select a desired empty channel. Then, flashing "MW"
will be displayed on the screen, next to which, there is an icon "E",
indicating that the current channel is empty and can be stored. Press
"SAVE" to save the channel.
3. If you press "QUIT", you will directly exit from the current page and the channel will not be saved.
4. In channel mode, short-press the BAND left and right buttons to switch between the stored channels.
Delete a channel:
1. In channel mode, select the channel to be deleted.
2. Call the multi-function menu [1/5], choose the MC function and select "CLR" to delete the current channel. If you press "QUIT", you will
directly exit from the current page and the channel will not be deleted.
Note:
● When storing a channel, if the channel you choose is not empty and you decide to continue the operation, the current frequency will be
stored to the channel and the previously stored information will be overwritten.