Manual

Product Inspection and Maintenance
Drone
1. Check the appearance of the drone for cracks and tightness of the screws.
2. Check the power buon and whether the indicator is working properly.
3. Check whether there is deformation, looseness and cracks in the arm and leg frame, and whether it is in
a symmetrical position.
4. Check whether the drone cooling holes are blocked or covered.
Remote control
1. Check the appearance of the remote control for any damage and abnormal buon function.
2. Check whether the operation of rocker bar, roller and antenna is smooth. If there is strong clamping
stagnation or friction, please contact the aer-sale service.
3. Charge once every three months to protect the baery life of the remote control.
4. If the remote control is replaced,the drone must pair RC again.
Baery
1. Check whether the baery appearance is damaged, bulged and leaking; If there is damage, please
replace the baery in time and properly handle the damaged baery.
2. Check whether the baery buckle is intact. Aer loading into the drone, whether the baery will
shake and fall off.
3. Check whether the pin of baery connector is bent, broken and blocked.
4. Check whether the surface of the baery connector is oxidized; if so, please replace it in time to avoid
poor contact.
Propeller
1. If the blade is deformed, damaged or cracked, please replace the blade in time.
2. Check whether the marks of propellerare consistent with the marks of motor to ensure correct installation.