User's Manual

Forced On

• The flash is enabled for each photo.

• The flash always fires regardless of the surrounding

lighting conditions.

• Select this mode when capturing images with high

contrast (backlighting) and deep shadows.

Note: If you use this option in a well lit environment,

your photo may be appear too bright/light

(overexposed).

Auto Flash

• When you want the camera to determine if Flash is

needed, select Auto Flash. The flash fires

automatically based on the photographic conditions.

• When the LED light stops blinking, the Flash is

ready for use.

Note: In some cameras, an initial flash appears to

test your lighting conditions. If flash is needed, a

second flash will appear upon taking the photo.

Red Eye Reduction

• Reduces the red-eye phenomenon when capturing

natural-looking images of people and animals in

low-light conditions.

• Be sure to the subject is looking at the camera lens

or get as close to the camera as possible.

• The flash fires automatically based on the

photographic conditions.

Note: If the flash is not working, check to see if the battery power is low. If so, try replacing the

batteries with new ones since the flash requires a good amount of battery power.

Focus Mode

Icon Mode Description

Auto focus

Adjusts focus automatically.