Specifications

ZETA AP
8
6. Installation
6.1. Installation Kit
Before the equipment is installed, customers need to prepare the following
installation tools and auxiliary materials:
Name
No.
Use Case
Screwdriver
1
For AP bracket, antenna, hoop and other screws
Wrench(#10)
1
For fixing screw nuts
Waterproof tape
1
For AP interface waterproof
Waterproof clay
1
For AP interface waterproof
Electrician knife
1
Used to intercept waterproof tape
LAN cables
(Cat.5 / Cat.5e /
Cat.6)
1
Used for power the device. (The length is based on the
actual route required)
Crystal head(TYF)
1
Used to make the cable head
Wire presser
1
Used to make the PoE network cable
Waterproof casing
few
Used to protect the exposed network cable (power cord)
Expansion screw
few
Used for equipment installation
Electric percussion
drill
1
For wall turning for the expansion screw
Tool pliers
1
Used to screw the ground wire
Strapping tape
few
For wire fixing
The list of installation accessories is as follows:
Accessory name
No.
Remarks
Mounting liner
2
Liner mounting screws
4
Mounting bracket (pair)
2
Hoop screws
4
Two sizes of screws are available:
long/short
Hoop
2
Antenna fitting
1