Specifications

ZETA AP
12
6.3. Antenna installation
6.3.1.U-ring fixing
This method is suitable for scenes with a pole diameter less than 5 cm:
1) Take out the antenna U-shaped fitting and disconnect the antenna
fitting screw
2) The antenna and the feeder are connected in advance and the
lightning protection and waterproof measures are taken according to the
specifications;
3) Close the antenna to the pole and use the U-ring in the accessory to
clamp and tighten the screw as shown:
6.3.2.Hoop fixing
This method is suitable for scenes with a pole diameter greater than 5 cm:
1) Remove the mounting back plate at the lower end of the antenna;
2) The antenna and the feeder are connected in advance and the lightning
protection and waterproof measures are taken according to the
specifications.
3) According to the diameter of the pole, buy a suitable size hoop in
advance