User's Guide

AM100 Series User Guide
9
Note: External power can't be used for charging battery.
4. Sensor Installation
4.1 PIR Detection Range
There should not be any isolates or barriers in PIR detection range.
4.2 Installation Note
In order to ensure the best detection and LoRaWAN communication effect, it is recommended to
install AM100 series as follows:
 There should not be any isolates or barriers in PIR and light detection range.
 Do not mount the device where the temperature is below/above operating range and
temperature varies greatly.
 Stay far away from any heat source or cold source like oven, refrigerator.
 Do not mount the device close to where airflow varies greatly like windows, vent, fan and air
conditioner.
 Do not mount the device upside down.
 Do not place the device right to the window or door. If you have to, you’d better pull the
curtain.

It is recommended to install at least 1.5m high from floor.