User's Guide

AM100 Series User Guide
26
Ursalink ToolBox (APP): Device → Settings → Data Collection Settings
Note: The data displayed on the screen is the current value.
The data reported to the gateway is the average of the reporting interval.
7.2.2 Data Calibration
Location:
Ursalink ToolBox (PC): Device Settings → Data Calibration Settings
Ursalink ToolBox (APP): Device → Settings → Data Calibration Settings
Data Calibration Settings
Item Description Default
Enable Enable calibration. Disable
Current Raw Value The current value. Null
Calibration Value
The error value used for calibration.
Range: -65535 to +65535
Null
Calibration button Click to reset value to 0. Null
Final Value Adjusted value. Null
Temperature Calibration
Enter the calibration value for temperature.
Note: only one decimal is allowed.
Null