User's Guide

AM100 Series User Guide
13
5.Click “Power On” to turn on the device or “Power Off” to turn off the device.
6.Enter password (Default password:123456) and press Enter key to change device status.
5.3 Turn ON/OFF via Button
Press and hold on the power button on the back panel for 3 to 10s to turn on or off the device.
Press and hold on the power button on the back panel for over 10s to reset the device to factory
default.
6.Sensor Configuration
Ursalink AM100 series sensors can be monitored and configured via NFC technology. In order to
protect the security of sensor, password validation is required when turning on/off the sensor or
changing configuration. Select one of the following ways to configure AM sensors.
6.1 Configuration via Smartphone APP
Make sure Ursalink Toolbox APP is downloaded and installed on your smartphone.