User's Guide

AM100 Series User Guide

5.1 Turn ON/OFF via Smartphone APP

1. Download Ursalink configuration APP “Toolbox” and install it on your smartphone. The

smartphone must support NFC.

2. Enable NFC on the smartphone and open the APP.

3. Attach the smartphone with NFC area to the device.

Note: Ensure the location of your smartphone NFC area and it is recommended to take off phone

case before using NFC.

4. Device information will be shown on the APP.

5. Switch the button of Device Status to turn on or off the device.

6. Enter password (default password: 123456) and wait a few seconds until APP shows “Operate

Successful!”.

Note: Keep the two devices close together and do not move them in order that you can get the

best connectivity as possible when turning on or off via NFC. No response can be caused by long

distance, wrong location or rapid movement.