User's Guide

AM100 Series User Guide

4.3 Wall Mounting

1. Attach the mounting sticker to the wall.

2. Mark the wall where the two mounting holes are according to the sticker’s mark(around

88mm).

Note: The connecting line of two holes must be a horizontal line.

3. Drive two screws into wall at the marks using screw driver.

4. Mount the device on the wall.

5. Turn ON/OFF the Sensor

AM100 series can be turned ON/OFF via smartphone or computer with NFC (Near Field

Communication) or button. Select one of following methods to turn on/off the device.

Note: When AM100/AM102 is off, the screen staticly displays the following information which

will not consume power.