User's Manual

18
printing density and
speed;
c. Printer head/rubber
roller has dust or
glue;
d. Printer head
damaged;
adjust the printer printing
density and speed. Setting tool
adjusting concentration for
coarse adjustment, drive to
adjust concentration for fine-
tuning;
c. Cleaning printer head/rubber
roller(take reference of Point
4.1 cleaning printer head/Point
4.2 cleaning sensor, rubber
roller and paper path);
d. Use setting tool to check the
head defect point, if the printer
head damaged, PLS contact
with the manufacturer's
customer service department
for repairing;
Printing
incomplete
a. Paper is not placed
centered;
b. Label size setting
incorrect;
a. Adjust paper position;
b. Set correct label size;