User's Manual

1.5 Ribbon specification.
Ribbon outer diameter
Max 67mm
Ribbon length
Max 300m
Ribbon core size
1 inch(25.4mm)
Ribbon width
Max.110mm
Min.30mm
Ribbon rolling up method
Outward rolling
1.6 Paper specification
Model
RP400
RP500
Inner paper roll max outer
diameter
127mm(5″)OD
Paper type
Continuous paper，gap paper，fold paper，black label
paper
Paper rolling up method
Print face outward rolling/Print face inner rolling
Paper width（label backing
sheet）
Max 115mm（4.53″）
Min 20mm（0.78″）
Paper Thickness（label
backing sheet）
Max 0.254mm（10mil）
Min 0.06mm（10mil）
Paper core size
25.4mm～38mm（1″～1.5″）
Label length
10～2286mm（0.39″～90″）
Gap paper gap height
Min 2mm（0.09″）
2. Product Introduction
2.1Seal of and Inspect
This printer is specially packed to prevent possible damage during
transit.However, in view of the printer in transit is likely to be expected damaged,
it’s recommended that you check the packaging and printing advice when receive the
printer. If there is obvious damage, please contact the selling shop directly and