User's Manual

4. Plug the power line into the back of the printer, and then plug the other end into the AC
outlet.
Caution：
*Please close the printer's power switch, and then insert the power line into the printer's power
slot.
*As Photos, printer transmission interface will vary according to the difference of your
purchase printer’s type, the actual transmission interface, please refer to the corresponding
product specifications
3.2 Ribbon installation
1. Push the switch on the left and right sides of the upper cover, and open the upper cover of the
printer.
2. Setthe empty scroll into the ribbon recovery shaft
3. Make the left side of recovery shaft (Hexagonal side) pressed into the ribbon recovery wheel,
and then assembles the right side