User's Manual
Table Of Contents
- I. Instructions
- 1.1. Safety warnings
- 1.2 Precautions
- II. Main features
- III. Instructions on technical specifications
- IV. Installation and operation of the printer
- 4.1 Unsealing of the printer
- 4.2 Connection method of the printer
- 4. 3 Installation of paper rollers
- 4.4 Installation of label paper
- V. Switches, buttons and indicator lights of the
- 5.1 Power switch
- 5.2 Self-check test of the printer
- VI. Cashbox port of the printer
- VII. Printer cleaning
- 7.1 Clean the printer head
- 7.2 Cleaning sensor
- 7.3 Printing rubber roller cleaning
- VIII. Paper jam elimination method
- IX. Malfunction elimination
- 9.1 Indicator light on the control penal fail to w
- 9.2 Indicator light function well, but the printer
- X. Printer driver
- 10.1 Driver installation under Windows
- 10. 2 Direct drive of serial ports
- XI. NFC function
Notes
1. First plug in the printer power plug DC24V, then connect AC220V power supply, after that open the
power source switch. Pay attention to the order, otherwise the machine might be damaged.
2. Using inappropriate power adapter will affect the printing quality and even damage the printer.
3. Don’t plug the telephone line to the cashbox port, otherwise both the printer and the telephone are likely to
be damaged.
4. When plug in or pull out the printer power cord, please hold the arrow of the printer power cord (don’t
hold the flexible line plug of the printer power cord).
Pull the flexible plug of the printer power cord or turn the printer power cord forcefully may cause damage
to the printer.
4. 3 Installation of paper rollers
ACE VI printer uses 80.0 mm thermal paper roller, it’s convenient to put paper into the machine as it adopted
a pro tipping paper structure.
Thermal paper installation method is as follow:
Open the cover and turn the lever
open the front cover of the printer
Make sure the front cover has been opened
Correct direction
Wrong direction
Make sure the printing side of the paper roller face
forward and put in the paper roller; pull out the paper
roller ahead of the front cover.
Close the front cover of the printer, and press
forward gently until a sound of lock is heard.