User's Manual
Table Of Contents
- I. Instructions
- 1.1. Safety warnings
- 1.2 Precautions
- II. Main features
- III. Instructions on technical specifications
- IV. Installation and operation of the printer
- 4.1 Unsealing of the printer
- 4.2 Connection method of the printer
- 4. 3 Installation of paper rollers
- 4.4 Installation of label paper
- V. Switches, buttons and indicator lights of the
- 5.1 Power switch
- 5.2 Self-check test of the printer
- VI. Cashbox port of the printer
- VII. Printer cleaning
- 7.1 Clean the printer head
- 7.2 Cleaning sensor
- 7.3 Printing rubber roller cleaning
- VIII. Paper jam elimination method
- IX. Malfunction elimination
- 9.1 Indicator light on the control penal fail to w
- 9.2 Indicator light function well, but the printer
- X. Printer driver
- 10.1 Driver installation under Windows
- 10. 2 Direct drive of serial ports
- XI. NFC function
Environmental
adaptation
Operating temperature: 0~40°C
Operating relative humidity: 20~70%
Storage temperature: -20~70°C
Storage relative humidity: 5~95%
IV. Installation and operation of the printer
4.1 Unsealing of the printer
Main engine
Power adapter
Power cord
Quick install guide
Paper roll
Disk
Communication cable
Warranty card
Parts inspection: please check the whole set of parts before opening the box. If there are any missing
parts, please contact the supplier or manufacturer.
4.2 Connection method of the printer
The special power adapter connected to the printer
Connect to the host computer.
Please use the randomly attached special power adapter. Connection diagram as shown above: