User's Manual
Table Of Contents
- I. Instructions
- 1.1. Safety warnings
- 1.2 Precautions
- II. Main features
- III. Instructions on technical specifications
- IV. Installation and operation of the printer
- 4.1 Unsealing of the printer
- 4.2 Connection method of the printer
- 4. 3 Installation of paper rollers
- 4.4 Installation of label paper
- V. Switches, buttons and indicator lights of the
- 5.1 Power switch
- 5.2 Self-check test of the printer
- VI. Cashbox port of the printer
- VII. Printer cleaning
- 7.1 Clean the printer head
- 7.2 Cleaning sensor
- 7.3 Printing rubber roller cleaning
- VIII. Paper jam elimination method
- IX. Malfunction elimination
- 9.1 Indicator light on the control penal fail to w
- 9.2 Indicator light function well, but the printer
- X. Printer driver
- 10.1 Driver installation under Windows
- 10. 2 Direct drive of serial ports
- XI. NFC function
I. Instructions
ACE V1 printer is POS directly thermal receipt printer, which is easy to operate and cost-effective. They are
widely used in such various fields as shopping malls, supermarkets, hospitals, canteens, banks, gas stations,
tollbooth of roads and bridges, etc.
Safety notes:
Before using the printer, please read the following instructions carefully and adherence to the reference
strictly.
1.1. Safety warnings
Warning: Don’t touch the cutter or tearer of the printer.
Warning: The printer head is exothermic, so don’t touch it and it’s surrounding parts during the process of
printing or printing has just finished.
Warning: Don’t touch the surface of the thermal printer head and fittings lest the printer head may be broken
by static electricity.
Warning: The product is only applicable under non-tropical climate.
Warning
It’s A level product, which may cause radio disturbance in life. Under such circumstance, users may need to
take proper and feasible measures to cope with the disturbance.
1.2 Precautions
Printer should be installed in a secure place to
avoid vibration and shock
Don’t use or store the printer under high
temperature, high humidity or seriously polluted
places.
Connect the power adapter of the printer to a
properly grounded outlet to avoid using the
same socket with facilities such as large
electrical machine or other equipment that can
lead to the power supply voltage fluctuation using
the same socket.
Avoid water or conductive material (such as metal)
entering into the printer. Once happened, turn off
the power supply immediately.
The printer shall not work without paper,
otherwise the printing rubber roller and the
thermal print head will be damaged severely.
If you don’t use the printer for a long time, please
cut off the power supply of the power adapter.
Users shall not remove the printer for repair or
reconstruction.
The power adapter will only use special designed
power adapter distributed randomly.
Please take good care of the manual for reference.