User's Manual

Attention
1. Printer maintenance is must in the condition that the power supply is turned off.
2. Do not touch the print head surface with hand and metal goods. Do not use tweezers and other
tools to scratch the print head, printing rubber rollers and sensor surface.
3. Do not use gasoline, acetone and other organic solvents.
4. Only when the anhydrous alcohol was fully evaporated can we turn on the power to continue
printing.
VIII. Paper jam elimination method
When the printer jam occurred, first turn off the power of the printer, open the upper cover of the
printer, remove stuck in the paper carefully after waiting for the print head cooling, and then right
on paper, close the upper cover. It is not easy to jam if the printing paper selected is recommended
or similar quality or its width is in conformity with the provisions.
IX. Malfunction elimination
When the printer failed, you can refer to the corresponding processing section. If you are still
unable to remove the fault, please contact distribution dealer or manufacturer.
9.1 Indicator light on the control penal fail to work
Check whether the power cord correctly inserted into the printer, power adapter and power socket.
Check that the printer electrical source switch is urn on or not.
9.2 Indicator light function well, but the printer fail to work
Run the self-test to check whether the printer is working properly. If It can not self test, please
contact the dealer or technical service personnel.