User's Manual

Product maintenance in winter
Not use in a long time
Cleaning and maintenance
When the temperature of toilet below 0℃：
-Pull out the power plug.
-Remove water inlet hose from the angle valve to the toilet end, and
empty the water in the water inlet hose;
-Remove the bottom nut,and drain internal water.
When this product is not used for a long time, drain the water in the product and cut off
the power supply:
- Pull out the power plug.
- Close angle valve and stop the water inlet.
- Remove water inlet hose from the angle valve to the toilet end, and empty the water in
the water inlet hose.
- Close the upper cover, press and hold the removal button by hand, move the electronic
seat cover from the front, and then complete the removal.
- Place the cover in a cool and dry place when not in use for a long time.
15