User's Manual

RF Exposure Compliance and Control Guidelines
and Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled
environment
adhere to the following procedures.
Guidelines:
• Do not remove the RF Exposure Label from the device.
• User awareness instructions should accompany device when transferred to other
users.
• Do not use this device if the operational requirements described herein are not
met.
Operating Instructions:
• Transmit no more than the rated duty factor of 50% of the time. To transmit
push the Push-To-Talk (PTT) button. To receive calls, release the PTT
Transmitting 50% of the time, or less, is important because this radio
measurable RF ener
gy exposure only when transmitting (in terms of
standards compliance).
• Hold the radio in a vertical
position in front of face
with the microphone (and the
other a
including the antenna) at least one inch (2.5 cm) away
from the nose.
radio at the proper distance is important because RF
di
stance from the antenna. Antenna should be kept
away from eyes.
• When worn on the body, always place the radio in a
approved clip, holder, holster, case, or body harness for this product.
approved body-worn accessories is important because the use of
or other manufacturer’
s
may result in exposure levels, which
exceed the FCC’s occupational/controlled
environment RF exposure limits.
• If you are not using a body-worn accessory and are not using the radio in the
front of the face, then ensure the antenna and the radio
are kept at least 2.5 cm (one inch)
om the body when transmitting. Keeping the
radio at the proper distanc
because RF
exposures decrease with
increasing distance from the antenna.
• Use only
replacement antennas,
batteries, and accessories. Use of non-
approved antennas,
the FCC RF exposure guidelines.
This equipment complies with FCC radiation exposure limits set forth for a controlled environment .
exposure limits always
(talk),
button.
generates
measuring for
parts of the radio,
Keeping the
exposures decrease with
Xiamen Puxing Electronics Science&
Technology Co., Ltd
Using
Puxing Electronics Science&
accessories
Technology Co., Ltd non-approved
Xiamen
position in
fr
e is important
Xiamen Puxing Electronics Science&Technology Co., Ltd
approved supplied or
Science&Technology Co., Ltd
Xiamen Puxing Electronics
batteries, and accessories may exceed