User's Manual

The One Touch Access feature allows you to make a Group or
Private Call to a predefined alias or ID easily. This feature can
be assigned to a short or long programmable button press.
You can only have one alias or ID assigned to a One Touch Access
button. Your radio can have multiple One Touch Access buttons
programmed.
Procedure:
1. Press the programmed One Touch Access button to make a Group
or Private Call to the predefined alias or ID.
2. Press the PTT button to make the call. The display shows the
group/subscriber alias or ID, and the Group/Private Call icon.
3. Release the PTT button to listen. When the target radio
responds, the LED blinks green.
4. If there is no voice activity for a predetermined period of
time, the calls ends. Radio returns to the screen you were on
prior to initiating the call.
Emergency Operation
An Emergency Alarm is used to indicate a critical situation. You
are able to initiate an Emergency at any time on any screen
display even when there is activity on the current channel.
Each alarm has the following types:
Disabled: Radio cannot transmit alarm signal, but can receive
alarm from other radios.
Regular: Radio transmits an alarm signal and shows audio and/or
visual indicators.
Silent: Radio transmits an alarm signal without any audio or
visual indicators.
Silent with Voice: In alarm status initiate an alarm, press [PTT]
button to call and emit sound.
Exiting Emergency Mode
Your radio exits Emergency mode when one of the following occurs:
 Emergency Alarm acknowledgement is received(for Emergency Alarm
only),OR
 All retries to send the alarm have been exhausted, OR
 The Emergency Off button is pressed.
 Press [PTT] button
NOTE: If your radio is powered off, it exits the Emergency mode. The
radio will not reinitiate the Emergency mode automatically when it is
turned on again.
MENU Feature Operation
Using the Keypad