User's Manual
4. Press to Radio Active and press [OK] to select.
5. The display shows Radio Active: <Subscriber alias or ID>.
6. If successful, a tone sounds and display shows Radio Active
successfully. OR if failed, a tone sounds and display shows Radio
Active failed. During operate radio Active, do not press [BACK]
button, because you will not get the confirmation information.
Scan
Scan lists are created and assigned to individual channels/groups.
Your radio can support up to 250 scan lists, with a maximum of 16
members in a list. Each scan list supports a mixture of both analog
and digital entries. You can add, delete, or prioritize channels by
editing a scan list.
Viewing an Entry in the Scan List
Procedure:
1. Use the Channel Selector Knob to select a channel programmed with
a scan list.
2. Press [MENU] to access menu.
3. Press to Scan and press [OK] to select.
4. Press to View List and press [OK] to select.
5. Use to view each member on the list.
If set priority, the Priority icon appears left of the member’s
alias, indicate whether the member is on a Priority 1 or Priority 2
channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
There is no Priority icon if priority is set to None.
Scan Instructions and Methods
When you start a scan, your radio cycles through the programmed scan
list for the current channel looking for voice activity. The LED
blinks red and you see the Scan icon on the display.
There are two ways of initiating scan:
Manual Scan: Initiate scan according to the programmed
Scan ON/Off button or menu function. When initiate scan,
radio will detect all channels/groups on the programmed
scan list.
Auto Scan: Your radio automatically starts scanning when
you select a channel/group that has Auto Scan enabled.
Starting and Stopping Scan
Procedure:
Press the programmed Scan button to start or stop Scan OR follow the
procedure below:
1. Use the Channel Selector Knob to select a channel programmed with
a scan list.
2. Press [MENU] access to menu.
o
r
o
r
o
r
o
r