User's Manual

Your radio supports a maximum of 50 Quick Text messages as programmed

by your dealer.

While Quick Text messages are predefined, you can edit each message

before sending it.

Procedure:

1. Press [MENU] button enter into menu mode.

2. Press to Message and press [OK] to select.

3. Press to Quick Text and press [OK] to select.

4. Press to required Quick Text and press [OK] to select.

5. A blinking cursor appears. Use the keypad to edit the message, if

required. Press to move one space to the left. Press or

the [#] key to move one space to the right. Press [* DEL] key to

delete any unwanted characters.

6. Press [OK] button to send or store once message is completed.

7. Select Send and press to the required alias or ID and

press [OK] to send the message, or press to Manual

Dial, press [OK] button, input subscriber ID and press [OK] button.

8. The display shows Text Message :< Subscriber/Group Alias or ID>,

confirming your message is being sent.

9. If the message is sent successfully, a tone sounds and the display

shows Message Sent. OR if the message cannot be sent, a high tone

sounds and the display shows Message Send Failed. If the text

message fails to send, the radio returns you to the Resend option

screen.

You can also press One Touch Access button to send a predefined Quick

Text message to a predefined alias or ID.

Managing Fail-to-Send Text Messages

You can select one of the following options while at the Resend

option screen:

 Resend

 Forward

 Edit

Resend Text Message

Procedure:

1. Press [OK] to resend the same message to the same subscriber/group

alias or ID.

2. If the message is sent successfully, a tone sounds and the display

shows Message Sent. OR if the message cannot be sent, the display

shows Message Send Failed.

Forwarding a Text Message

Select Forward to send the message to another subscriber/group alias

or ID.

Procedure:

1. Press to Forward and press [OK] to select.