User's Manual

3. Press button to the required subscriber alias or ID

and press [OK] to select. Or press button to Manual

Dial, then press [OK] twice, input subscriber ID, then press [OK]

button.

4. Press button to Radio Check, then press [OK] button.

5. The display shows Radio Check: <Subscriber Alias or ID>,

indicating that Radio Check is in progress. The LED lights up red.

6. If the target radio is active in the system, a tone sounds and the

display briefly shows Target Radio Available OR if the target radio

is not active in the system, a tone sounds and the display briefly

shows Target Radio Not Available.

7. Radio returns to the subscriber alias or ID screen. If the [Back]

button is pressed when the radio is waiting for acknowledgement, the

radio terminates all retries and exits Radio Check mode.

Remote Monitor

Use the Remote Monitor feature to turn on the microphone of a target

radio (subscriber alias or IDs only). No audible or visual indication

is given to the target radio. You can use this feature to monitor,

remotely, any audible activity surrounding the target radio.

Your radio must be programmed to allow you to use this feature.

Initiating Remote Monitor

Procedure:

Use the programmed Remote Monitor button.

1. Press [MENU] to access the menu.

2. Press button to Contacts, then press [OK] button to

select.

3. Press button to the required subscriber alias or ID

and press [OK] button to select OR press button to

Manual Dial, then press [OK] twice. Input subscriber alias or ID

and press [OK] button.

4. Press button to Remote Monitor and press [OK] button.

5. The screen display remote monitor: < Subscriber alias or ID>,

indicating that Remote Monitor is in progress. The LED blinks red.

6. The display shows Remote Monitor Successful OR The display shows

Remote Monitor Failed.

7. If successful:

The radio starts receiving audio from the monitored radio for a

programmed duration. Once the timer expires, LED turns off.

Contacts Settings

Contacts provide “address-book” capabilities on your radio. Each

entry corresponds to an alias or ID that you use to initiate a

call.

Each entry within Contacts displays the following information: