User's Manual

14
Wired Network Setting ()Internal router
Method 1: Easy Setup Wizard
Network Settings(Continued)
Select
Easy Setup Wizard
Select Gateway
Next
There are five methods to connect with
network, choose your preferred one.
Recommended to select the DHCP
Client connection. Automatically obtain
IP information from your ISP.
Automatically obtain IP
information from your ISP. If your ISP
doesn’t provide a designated IP for you,
then choose DHCP Client.
If all Internet IP information is
provided by your ISP, then choose Static
IP.
Ethernet Point to Protocol. Your
ISP will provide you with Login ID and
password. Usually this option is
applicable to DSL service.
Point to Point Tunneling Protocol.
Your ISP will provide you with Login ID
and password.
Layer 2 Tunneling Protocol. Your
ISP will provide you with Login ID and
password. Usually this option is
applicable to DSL service.
DHCP Client:
Static IP:
PPPOE:
PPTP:
L2TP:
Password Setting Format
Input the default UserName: admin,
skip the default password setting as
there is no default password, then
press Login button.
Finished
WiFi Password of Internal
Router in the screen.
(Password should be set at
least 8 characters. )
Get IP address
Setting successfully