User's Manual

Advanced Video Adjustment
1
Navigate to the PICTURE menu, press 6 or OK to access the menu.
Press5or6to select the Advanced Video and press4or OK to
access.
2
Within the menu, press5or6to select items and press3,4or OK
to access and press 5 6 34to adjust the selected item.
3
Continue pressing the MENU button to exit the menu screen.
4
Picture Adjustment (Continued)
14
Option
Description
Sets the overall brilliance of the screen.
Backlight
Color Temperature
Overscan
Noise Reduction
Selects one of three automatic color adjustments.Sets to Warm to enhance hotter colors
such as red, or set to Cool to see less intense colors with more blue.You can select from
Cool, Normal and Warm.
Selects On to adjust the picture’s reproduction rate when receiving HDMI signal. (Depending
on versions, in some models this function is not available.)
Selects from Low/Middle/High to reduce noise in the picture, commonly called snow.
Selects Off to turn off this function.
Advanced Contrast
1. Navigate to the Advanced Video submenu and press 5or6to select Advanced
Contrast, press3,4or OK to access.
2. Press5or6to select Dynamic Contrast or Dynamic Backlight and use 3or4to turn
on or turn off the function.
Reset Picture Settings
Reset all PICTURE settings to factory defaults.
Aspect Ratio
You can select the aspect ratio (display proportions) according to your video signal type or
personal preference. You can select from Normal, Zoom, Cinema and Wide.
Normal: Displays the image of the original proportions.
Zoom: Enlarges the picture. The top and bottom portion of the picture may be cropped.
Wide: Displays a full-screen picture.
Cinema: Stretches the picture at the edges while maintaining a good aspect ratio at the
center of the screen.
! Dynamic Contrast: Turns On to automatically adjust picture detail and brightness.
! Dynamic Backlight: Turns On to enhance contrast ratio between light and dark areas of
picture. (Once Dynamic Backlight is set to On, the Backlight
item can not be adjusted.)
RETURN
MOVE
SELECT
SETTING
PICTURE
AUDIO
CHANNEL
Backlight
Color Temperature
Aspect Ratio
Noise Reduction
Reset Picture Settings
Overscan
Advanced Contrast
100
Normal
Wide
Middle
On
RETURN
MOVE
SELECT
SETTING
PICTURE
AUDIO
CHANNEL
User
50
50
60
50
50
Picture Mode
Contrast
Brightness
Color
Sharpness
Hue
Advanced Video
Note: You can also press the ZOOM button on the remote control to select it.
Note: You can also press DCR button to turn on or turn off the Dynamic Backlight directly.
HDMI 1
HDMI 2
USB
Ser vice on ly
USB
TOUCH
RS-232 1
RS-232 2