User's Manual

Connections (Continued)
10
Connecting a computer
To connect a computer:
1. Turn on your display and press the INPUT button.
The Input Source menu will open.
2. Press 5 or 6 to select VGA and press OK to
confirm.
3. Turn on your computer and adjust the display
properties as required.
To play video from the computer:
Connect a VGA cable between the VGA jack on the computer and the
VGA input jack on the display.
Connect an Audio cable between the AUDIO output jack on the
computer and AUDIO input jack on the display.
Connecting USB TOUCH
VGA cable
(analog RGB)
To display port
(15-pin D-Sub)
To audio output jack
Audio cable
(stereo mini plug)
VGA OUT
AUDIO
OUT
USB
Computer
USB
HD MI
Connect USB TOUCH with USB cable to PC USB port.
Connect PC with VGA cable or HDMI cable. Please choose the proper method
of connection based on your device.
Note: After installation of the driver, it can control the external
computer by native touch control. (Only for PC、HDMI signal)
USB cable
HDMI 1
HDMI 2
USB
Ser vice on ly
USB
TOUCH
HDMI 1
HDMI 2
USB
Ser vice on ly
USB
TOUCH
RS-232 1
RS-232 2